Kitchen Utensils Electropolishing Services |
- Home
- SS Basket Electropolishing Services
What Is Ss Basket Electropolishing Services ?
We are a prominent service providing business entity and are engaged in rendering SS Basket Electropolishing Services. We well understand the varied need and requirements of our clients and offer this elecropolishing services with perfection in compliance with the guidelines and parameters set forth in the industry. Moreover, these exterior renovation services are rendered at market leading rates to suit the budget of our esteemed customers in efficient manner.
Design Features of This Basket
This particular basket is designed with a large, open base. At 17.25” long, 13” wide, and 7” deep, with no internal partitions or other obstacles along the bottom of the basket, this custom metal basket can be used for a variety of parts and materials handling applications. This universal design allows the basket to either handle one or two very large parts, or many smaller parts so long as part-to-part abrasions aren’t a factor.
The bottom and sides of the basket are covered in a fine wire mesh consisting of 0.047” thick wires spaced 0.08” apart. This allows the basket to hold very small parts without risk of allowing parts to fall through the gaps, while still allowing liquids and very fine particulates to drain away from the parts in the wash cycle.
The basket’s frame is molded from 0.313” thick grade 304 stainless steel wires, with a wire mesh lid attached to a piece of sheet metal so that it can be secured to the basket with ease. This lid helps to further ensure that no parts are lost during the wash process or during handling in between wash/finish processes.
Attached to the basket’s outer frame are two long lengths of 0.375” thick wires which allow for the basket to be held by hand with plenty of clearance, or for the basket to be suspended from a series of hooks during automated movement.
One important feature of this basket is that the wire mesh at the “bottom” of the basket is held slightly elevated from whatever surface the basket is resting on. This was done by adding a second base to the bottom of the basket, complete with extra support bars, two “V” shaped bars and a straight bar that runs across the width of the base. This elevated base keeps the thinner, more delicate wire mesh safe from the risk of contact with hot or caustic surfaces, and gives liquid solutions room to drain away from the mesh even when the basket is resting on a surface.
As a finishing touch for this basket, all of the basket’s materials were electropolished to help remove any microscopic flaws so that the basket was left with a smooth, shiny finish and fewer chances for liquid or solid debris to cling to the basket after a wash process.
Manufacturing the Basket
Naturally, before this wire mesh basket could be shipped to the client, it had to be rigorously tested for any design flaws first. Using Autodesk software, the design specs for this basket were run through virtual tests for thousands of uses for the customer’s particular wash/finish process. Throughout these tests, if the frame or the wire mesh of the basket deformed by so much as a human hair’s width, the design would fail and Marlin Steel’s engineers would set to work correcting for the flaw.
Once the basket’s design was refined to the point where it would pass tests that were even more strenuous than the projected use of the basket, the design was approved and moved to production.
Thanks to Marlin Steel’s investments in manufacturing automation, once the wire bending, welding, cutting, and other assorted robots were set for production, baskets could be made at incredible speed with laser-tight precision. When a manufacturing robot sets to work, it can keep working tirelessly all day without the need for breaks because it doesn’t get tired, bored, or inattentive. This keeps accidents down to almost nothing, which is part of the reason why Marlin Steel’s production floor hasn’t had a lost-time incident in over half a decade.
With the benefit of factory automation, Marlin Steel was able to complete production of the client’s order quickly, and ship that order to the client within a couple of weeks of beginning the design process for the basket. Not months, weeks. The whole process, from initial design to delivery, took less time for Marlin Steel to complete for this domestic order than the time a shipment from China typically spends waiting for available cargo space, let alone production, seaborne shipping, and customs delays.
To learn more about how an American manufacturer that uses advanced factory automation can deliver better results to you faster, contact Marlin Steel today.
Most Frequently Asked Questions
Kitchen Utensils Electropolishing Services is good for creating a surface that is cleaner, smoother, and more representative of the base metal than any other method currently in use. This lends itself to bio-pharmaceutical applications where vessels and equipment must be easily verified as being clean. Kitchen Utensils Electropolishing Services also reduces surface area (vacuum applications), passivates the surface to a degree, and removes any imbedded impurities that may be present following mechanical polishing.
Kitchen Utensils Electropolishing Services removes material while electroplating deposits material. The two processes are very similar in that both use electrolytes to carry an electrical current, but with different polarity.
An electropolished surface is only as durable as the base metal itself. Rough handling and chloride damage are the two principle types of damage we repair most often.
Kitchen Utensils Electropolishing Services , also known as electrochemical polishing, anodic polishing, or electrolytic polishing (especially in the metallography field), is an electrochemical process that removes material from a metallic workpiece, reducing the surface roughness by levelling micro-peaks and valleys, improving the surface finish …
Passivation is a chemical process designed to remove free iron and other contaminants from the part surface. Kitchen Utensils Electropolishing Services is an electro-chemical process that removes surface metal which improves micro finish, provides deburring and adds to the aesthetics of your part.
The most widely used electrolytes for the Kitchen Utensils Electropolishing Services of stainless steel are varying concentrations of phosphoric and sulphuric acid, and occasionally additives such as chromic acid.
Kitchen Utensils Electropolishing Services , also known as electrochemical polishing, anodic polishing, or electrolytic polishing (especially in the metallography field), is an electrochemical process that removes material from a metallic workpiece, reducing the surface roughness by levelling micro-peaks and valleys, improving the surface finish …
It is often described as the reverse of electroplating. It differs from anodizing in that the purpose of anodizing is to grow a thick, protective oxide layer on the surface of a material rather than polish. Electropolishing is commonly used on stainless steel components after they have been sharpened.
SS Basket Electropolishing Services in Local Locations of Mumbai:-
Most common Cities in mumbai we delevered our services
Churchgate
Marin Line
Charni Road
Grant Road
Mumbai Central
Mahalaxmi
Lower Parel
Elphinstone Road
Dadar
Bhivandi
Diva
Sion
Govandi
Matunga Road
Bandra
Mahim
Khar
Santacruz
Vile parla
Andheri
Jogeshwari
Goregaon
Malad
Kandivali
Vashi
Mankhudr
Borivali
Dahisar
Bhayandar
Naigaon
Vasai Road
Nala sopara
Virar
Kalyan
Neral
Titwala
Mumbra
Wadala
Nerul
Thane
Ghatkopar
Bhandup
Colaba
Dombivili
Chembhur
Vikhroli
Karjat
Powai
Taloja
Mulund
Panvel
Kasara
Most common Cities in Gujarat we delevered our services
Ahmedabad
Surat
Vadodara
Rajkot
Bhavnagar
Jamnagar
Junagadh
Gandhinagar
Gandhidham
Anand
Navsari
Morbi
Nadiad
Surendranagar
Bharuch
Mehsana
Bhuj
Porbandar
Palanpur
Valsad
Vapi
Gondal
Veraval
Godhra
Patan
Kalol
Dahod
Botad
Amreli
Deesa
Jetpur
Kachchh
Panchmahal